The Display assembly is a crucial component of the Dell XPS 12 9250 laptop, and there may be instances where it needs to be removed for maintenance or repair purposes. The instructions for removing the Display assembly should be followed carefully to avoid causing any damage to the laptop. The process generally involves disconnecting the battery, removing any screws or clips that secure the Display assembly to the laptop, carefully detaching the Display assembly from the laptop, and disconnecting any cables or ribbons that are attached to the Display assembly. Once these steps have been completed, the Display assembly can be safely removed from the laptop for any necessary repairs or replacements.
Table of Contents
Remove the battery.
Instructions for removing the Battery of Dell XPS 12 9250 laptop
Peel off the display cable from the system board.
Using the pull tab, disconnect the display cable from the system board.
Peel off the display cable from the back-cover assembly.
Lift the display assembly, along with its cable, off the back-cover assembly.
- 1 display assembly
- 2 back-cover assembly
- 3 pull tab
- 4 display cable
Replacing the display assembly
- Adhere the display cable to the back-cover assembly.
- Connect the display cable to the system board.
- Adhere the display cable to the connector on the system board.